You may occasionally need to restart a VeeaHub mesh.

For example, some configuration actions are applied mesh-wide, and you may require a restart of the mesh to complete.

Control Center

When a restart is required, Control Center shows this for the mesh.

In this example, a restart is needed on all VeeaHubs in the mesh.

Trigger a Mesh Restart

Click on the top right Options menu.

Then click on Power Options.

Click on  Restart Now .

Click  Yes  to confirm. The Gateway and Mesh Nodes restart after a short delay.

Click  Done .

The Gateway and Mesh Nodes come back online and operational after a few minutes.