LED flashing and system status
On the 09/10 models, there are the following lights:
- Logo backlit with a set of RGB (red + green + blue) LEDs
- Two RG (red and green) LEDs marked STAT (Status, front) and PWR (power, back)
The flashing patterns of these lights indicate what VeeaHub is doing and, if there is a problem, what sort of problem it is. See the following sections for details.
Hub normal operation
The following combination shows that the VeeaHub is in normal operation.
Hub activity
Certain LED flashing combinations inform you about what the VeeaHub is doing. These are not error conditions.
Button presses
Certain LED patterns indicate the responses of the hub to button presses. These are not error conditions.
Hub errors
The LED combinations shown in Table 3 indicate different error conditions. Contact Veea Support if these conditions persist after restart or a 10-second reset.