LED flashing and system status
On the VHC05, there are two green LEDs, POWER and STATUS (Figure 1). The flashing patterns of these LEDs provide information about hub activity and possible problems.
Figure 1 - LEDs on the VHC05 Hub
VeeaHub normal operation
While both the LEDs are showing continuously, the VeeaHub is in normal operation (Table 1).
Table 1 - POWER and STATUS LED showing normal VeeaHub operation
If the POWER LED is continuously lit, the STATUS LED indicates what the hub is doing, as shown in Table 2. These are not error conditions.
Table 2 - STATUS LED showing VeeaHub activity
Certain LED patterns indicate the responses of the hub to button presses, as listed in Table 3. These are not error conditions.
Table 3 - LEDs after button presses
If the POWER LED is flashing evenly, there is an error of some kind. The STATUS LED indicates the type of error, as shown in Table 4.
Table 4 - STATUS LED showing VeeaHub error conditions