If you are using a VeeaHub supplied by a business or organization, you should follow any instructions supplied with it.
1. Set up your VeeaHub
Open your box and set up the VeeaHub components. Ensure that you can connect the Ethernet cable to the router or corporate network for Internet access, and the power adaptor to a suitably located socket. Do not connect either to the VeeaHub yet.
Open the Quick Start Guide for the model number of your VeeaHub.
If your VeeaHub came as part of an order for the vTPN Security Service, see the appropriate guide:
2. Use your VeeaHub
Your VeeaHub is now ready for use.
- You can access your VeeaHub mesh through Control Center. If you wish to add additional services to your mesh, you can do this through Control Center. You should also check regularly in Control Center for software updates.
- Using VeeaHub Manager, you have full control over configuration of your mesh and VeeaHubs. This is described in the VeeaHub Manager Guide.
For more information about tools for monitoring and configuring your VeeaHubs and meshes, see here.
See the Troubleshooting section.